The Rodin coil, advanced.
A classic Rodin coil is wound on a plain round torus. This module keeps Marko Rodin's full vortex-math winding - 22 wraps through the centre over 9 circuits, each pass skipping 147° around the torus - and lays it on a torus that twists as it goes around, in the shape of a stellarator. Like the Wendelstein 7-X, our core has five field periods: its elliptical cross-section rotates 180° in every period and the axis gently wobbles.
Why it is more effective
In a twisted torus the field lines spiral around the body and close back on themselves, so the field stays concentrated and self-contained. In a Rodin coil every turn crosses the central opening from a different direction, so the field gathers in the centre and flows as a vortex. Combined, they give a more effective way of generating a magnetic field than a standard Rodin coil: the same vortex winding, with the field guided by the shape of the core itself.
Vortex mathematics
The winding traces the doubling sequence 1-2-4-8-7-5, repeating without end, with 3, 6 and 9 forming the axis of the pattern. Rodin saw in it the basic pattern of how energy moves - leaving the centre, wrapping around the torus and returning to it. The twisted core closes that flow perfectly on itself: the vortex at the heart of scalar-wave work, made physical.
Connecting it
The module connects directly to our SWCC devices - the SWCC already has an amplifier built in, so nothing else is needed. It also works with other signal generators: the coil is a passive winding and needs an amplified signal, so with any other generator you connect it through an amplifier module (ours or another amplifier) and plug the amplifier output into the coil's two 4 mm banana sockets. The banana cable is not included with the set. Low-voltage signal sources only - never connect to mains power.
Specifications
- Core: 5-period twisted torus, approx. 175 mm across; about 75 mm high on its cradle
- Winding: Rodin pattern, 22 wraps over 9 circuits, 4.57 m enamelled copper wire in one continuous groove
- Centre opening approx. 60 mm
- Input: 2 x 4 mm gold-plated banana sockets
- Connects directly to Aplicum SWCC devices (amplifier built in); with other signal generators an amplifier module is required
- Included: the coil module.
Designed, 3D printed and hand wound in the Aplicum workshop.
