top of page

QUE VEUT DIRE EMF

EMF est l’acronyme pour ElectroMagnetic Field, en français Champs EléctroMagnétiques.

​

Les champs électromagnétiques sont généralement des flux/courants d’énergie qui sont émis à partir de sources naturelles( soleil, radiations cosmiques) et artificielles ( téléphones cellulaires, four micro-ondes, Téléviseurs, radios, WiFi, lignes électriques, etc…). Au début du 20th siecle, le réseau électrique s’est étendu à travers le monde. Bientôt les scientifiques ont contasté que les lignes électriques qui transportaient toute cette énergie émettaient des champs électromagnétiques. Avant cela dans l’histoire, la population humaine n’a jamais été exposée à la radiation des champs électromagnétiques (EMF).

​

Aujourd’hui nos corps sont exposés aux champs électromagnétiques de sources naturelle et artificielle. Les dommages causés par toutes les formes de radiation dépendent de notre exposition à elles. Par exemple seulement l’utilisation des téléphoniques cellulaires represente pas de grand risque pour notre santé mais l’exposition cumulative aux radiations à partir des téléphones cellulaires, WiFi, lignes électriques, des fours micro-ondes, des réseaux de transfert des données, ainsi que des autres appareils électriques domestiques peut un effet néfaste pour notre santé.

Key features

  • Fractal Antenna Receptors: Located on all four sides of the box, these antennas are designed to receive energy signals efficiently, contributing to the enhanced interaction with Scalar Wave and Radionics devices.

  • Triangular Bifilar Tesla Coil: Positioned at the bottom of the box, the Bifilar coil captures the energy field of samples inside the box, supporting the flow of energy within the box and ensuring efficient resonance with external devices.

  • Gold-Plated Flower of Life Sacred Geometry: Featured on the lid of the box, this symbol is known for its powerful metaphysical properties, enhancing the box's ability to focus and harmonize energies. At the same time, it also works as a top cover of the Faraday cage around the box.

  • Faraday Cage: Encasing the box, this protective shield eliminates external electromagnetic interference, ensuring the box's energy environment remains undisturbed.

  • Space for 9 Small Vials: The internal compartment allows for the inclusion of personal samples (such as hair, saliva, or other physical matter) for use in remote healing. This enhances the box’s function in personalized remote energy treatments.

Photoroom_004_20241110_153452.png

NLS box

Vial holder

Instruction for use

  • Setup:

    • Place the NLS box in a quiet, undisturbed environment where it can interact with Scalar Wave or Radionics devices effectively.

    • Connect the NLS box to a compatible Scalar Wave machine (e.g., MWO Harmonizer or Scalar Wave Cosmic Communicator) using the included 3.5mm aux cable.

​

  • Preparing the Vials:

    • Place up to 9 small vials in the designated slots inside the box. These vials should contain samples from the person for whom you are performing remote healing, such as hair, nails, or saliva. The presence of these samples will allow the device to establish a direct connection with the person for targeted energetic treatment. 

    • Under no circumstance should samples of several persons be used at once!

​

  • Connecting to Scalar Wave or Radionics Device:

    • Ensure that the Scalar Wave machine or Radionics device is powered on.

    • Connect one end of the 3.5mm aux cable to the NLS box and the other end to the appropriate input on the Scalar Wave or Radionics device.

    • Set the Scalar Wave or Radionics device to the desired settings based on the treatment or frequencies you wish to use. Refer to the user manual of the Scalar Wave or Radionics device for specific configuration details.

​

  • Operation:

    • Once connected, the NLS box will begin to interact with the Scalar Wave or Radionics machine, amplifying and focusing the frequencies for remote healing.

    • Depending on the settings of the connected device, the box may send healing frequencies to the vials, energize the samples, or harmonize the individual’s energy field.

​

  • Maintenance:

    • Ensure the NLS box is kept clean and free from dust or debris, especially the antenna receptors and internal compartments.

    • Regularly check that the connection cables and the Faraday cage are in good condition for optimal performance.

    • Vials should be thoroughly cleaned and disinfected in boiling water for 5 minutes after each use. Keeping the vials clean of any biological contaminants is essential.

​

  • Remote Healing:

    • When used in conjunction with a Scalar Wave or Radionics device, the NLS box can effectively send healing frequencies to the samples within the vials, allowing for remote healing at a distance. This process helps restore balance and harmony to the person associated with the samples.

    • Placing an orgone energy  disc on the connected Scalar Wave machine will increase the efficiency of the energy transmission and healing effect.

    • All of the Orgone Energy discs available on Aplicum are compatible with NLS remote healing system.

​

​

With its precision design and ability to work seamlessly with Scalar Wave and Radionics technologies, the NLS box is an essential tool for advanced energy healing practices.

Aplicum NLS remote healing device
NLS remote healing

NLS system with Scalar Wave Cosmic Communicator

NLS healing system with MWO harmonizer

NLS system with MWO harmonizer

Remote frequency transmission

In addition to its standard functionality, the NLS remote healing system can also be coupled with an external frequency generator. This allows you to send custom healing frequencies remotely to the target person, providing even more flexibility and precision in energy treatments.

​

How to Use an NLS system with an External Frequency Generator:

​

  1. Setup:

    • Connect the Scalar Wave device to the NLS box and to an external frequency generator using the 3.5mm aux connector, as specified by the generator's manufacturer. Our Scalar Wave devices have 2 aux connectors. One of them is used to connect the NLS box and the other is for external signal coming from the frequency generator. Either of the connectors can be used for both inputs. For example, you can connect the NLS box to the right connector or to the left one and vice versa the external frequency source can be fed either to the left or right connector.

    • The NLS system will receive and amplify the custom frequencies generated by the external device, allowing them to be sent remotely to the samples in the vials.

​

  1. Generating Custom Frequencies:

    • Use the external frequency generator to create the desired healing frequencies, tailored to the specific needs of the person or condition being treated.

    • Once the frequency is set, the generator will send the signal to the NLS system, which will direct the energy to the target person for remote healing. The samples in vials are used as a 'targeting mechanism' for the person in question.

​

  1. Remote Healing:

    • The NLS box, in combination with the external frequency generator, ensures that the custom frequencies are applied effectively, promoting healing and energetic balance for the target person. Since we are dealing with quantum entanglement here, the distance between the NLS system and the target person is not relevant.

NLS system with SWCC and external frequency source

Photoroom_000_20241110_171531 (1).png

Feeding external frequencies into the system

We have extensively tested the Aethergenerator web-based frequency generator and the Cymatic app, which works on both iOS and Android mobile devices. Developed in cooperation with Aplicum, the Cymatic app features a vast library of healing frequencies and can be used to generate custom frequencies for remote healing.

​

How to Use with Aethergenerator or Cymatic App:

​​​

  1. Generating Custom Frequencies:

    • The Cymatic app not only lets you create custom healing frequencies but also provides access to a vast library of pre-existing healing frequencies. You can use the app’s library or create personalized frequencies based on the needs of the individual being treated.

    • Once the frequency is set, it will be transmitted to the NLS system, which amplifies and directs it to the target person.

  2. Remote Healing:

    • When combined with the NLS box, both the Aethergenerator and Cymatic app allows for highly effective remote healing by sending precise, custom frequencies, supporting energetic balance and well-being for the target person.

bottom of page